You can do this all yourself, in fact, I just wrote a thing about doing this YESTERDAY, how to make your own mods, and if you want, I can get the information on how to melt your material to make the product. It will take a few times to get it right, but, that's all I can do...  There are a few ways to do it, professionally, the injection method seems to be the popular one.

See this: http://www.taxidermy.net/forums/MoldingMenu.html

That is a molding and casting forum.

ran into a problem, I need to get the special security star bit, I only have the regular torq drivers, so I'm gonna need to order a new one to get into it.

@rp41d

I used a regular t10 tork bit to get my lid off, just push a little harder or if you still cant get it drill out the center of the tork bit and it will go in farther so you wont have to push so hard. ive taken mine off 4 times without modifying the bit.

if you have one with the media slots sd, ms, cf make sure to remove the 2 screws that hold it down before pulling off the lid as 2 clips hold it to the lid and if u leave the screws in you might break a clip.
also when reassembling make sure to clip the memory stick module or whatever u want to call it back to the lid and dont screw it down till the lids on or u'll have a bitch of a time getting the lid on properly.



peace and good luck with the molding.

oh btw the manufacture of the case's name is on the inside of it. please post  cuz i cant remember and i wanted to look them up and contact them.

Last edited by idone (2008-01-14 01:19:52)

Yeah I'll make pictures maybe even a video of it, still nedd to mod the bit it won't work by just pushing on it hard.

I'd like to see all the parts up close if you want to photo or video the whole disassembly.

taking it apart now, url to video will be uploaded shortly.

So how is this going, i'd still be interested to see it