You are not logged in.
As far as I know there is no way to skip FW upgrade if certain game requires it, but maybe Im wrong? Does somebady know the way to skip it? I know theres a way to cheat ps 3 when you online, but its a diferent story with games?
Offline
you can bypass the FW upgrade for going onto the PSN store, and other online things.. but not for playing games.
Offline
- When you play "resistance - fall of man" and put on pause during the game
- then replace the blue ray by another game (wait few seconds)
- then "quit and save", the system will boot the other game avoiding the update firmware control.
Last edited by HackITandC (2007-05-18 15:33:36)
Offline
You should only have to update if you play a game on-line, there is no way around this as far as I know. Even with the Proxy thing, the on-line play would fail since it would not actually be making it on-line.
If you are playing a game just to play, you should not have to update the firmware, unless they have made serious changes that would effect game play.
Offline
Powerslave - you're not quite right
I have FW 1.51 and when I'm trying to play Scrolls of Oblivion it says that I have to upgrade to 1.54 before I can't play, even if my ps 3 isn't hoocked up to internet at all, never been and I newer played Scrolls before. It just wont let you do anything unless you upgrade. FoneFreak - thanks for idea, but still can't do anything without upgrade - let me know if you'll figure something out please.
Last edited by zielas (2007-05-15 18:28:56)
Offline
Guys it seems to be cut and mix at the minute, I posted the rfom exploit on another forum and one of the guys came back with this:
"I can confirm it works on my setup. I have a US NTSC PS3 firmware 1.10.
-I load USA RFOM.. (the US version of this game loads on firmware 1.10... start game then pause (in game).
-Hit eject and put in Motorstorm PAL version (which normally requires firmware 1.50 - I have been unable to load this game on this console before... was reluctant to update to 1.50)
-Press Save and quit... and my motorstorm loads!
Great find.. Thanks very much. I can stay at v1.10 for a while longer "
Offline
zielas wrote:
Powerslave - you're not quite right
I have FW 1.51 and when I'm trying to play Scrolls of Oblivion it says that I have to upgrade to 1.54 before I can play, even if my ps 3 isn't hoocked up to internet at all, never been and I newer played Scrolls before. It just wont let you do anything unless you upgrade. FoneFreak - thanks for idea, but still can't do anything without upgrade - let me know if you'll figure something out please.
If that is true, then Sony is worried about an ISO loader coming out. There should be no reason to HAVE to update the firmware to play a game, it ran fine before, so why now does it need later firmware now? Even with Xbox 360, the only time you have to update is if you go on-line, or want to download content for a game. You can get critical game patches and updates, and you can't play the game till you update that part, but NOT if there is a system update. You can continue to play the game, you just can't sign in to live without taking the sys-update.
Offline
FoneFreak – that’s awesome!!! The whole thing is working perfectly – my fault didn’t read your post correctly. Instead of pressing “save and quit” in game menu I was pressing PS button and leaving game! So I can confirm that loophole in Fall of Man is working, at least on my setup: PAL PS 3 with FW 1.51. Couldn’t play Scrolls of Oblivion – requires 1.54 upgrade, but when done through Fall of Man works superb. THANKS!!!
Offline
FoneFreak wrote:
Guys it seems to be cut and mix at the minute, I posted the rfom exploit on another forum and one of the guys came back with this:
"I can confirm it works on my setup. I have a US NTSC PS3 firmware 1.10.
-I load USA RFOM.. (the US version of this game loads on firmware 1.10... start game then pause (in game).
-Hit eject and put in Motorstorm PAL version (which normally requires firmware 1.50 - I have been unable to load this game on this console before... was reluctant to update to 1.50)
-Press Save and quit... and my motorstorm loads!
Great find.. Thanks very much. I can stay at v1.10 for a while longer "
Thanks for posting that method i have to try it at some point...
Offline
dude, wtf? I have 1.5, and Oblivion loads fine.

Offline
zielas wrote:
FoneFreak – that’s awesome!!! The whole thing is working perfectly – my fault didn’t read your post correctly. Instead of pressing “save and quit” in game menu I was pressing PS button and leaving game! So I can confirm that loophole in Fall of Man is working, at least on my setup: PAL PS 3 with FW 1.51. Couldn’t play Scrolls of Oblivion – requires 1.54 upgrade, but when done through Fall of Man works superb. THANKS!!!
Good news friend, what version of rfom do u have?, is it a PAL version or US/Jap?
Offline
i have a suggestion, can we change the title of this thread or come up with a different one and stick this? for example; "how to bypass game firm update as of 05/16/07".
then maybe we could all post hour info in order like this;
machine - firmware 1.31 NCTS
game used to swap - resistance
game booted - oblivion
what do you guys think? just an idea, this way we could all organize all of this info. also... can someone post if they were able to boot SPLINTER and FEAR either NCTS or PAL format? thanks.
Offline
I added it to the top sticky in the HACKS section.
Post your confirmed working testimonials and I will add them as well.
Offline
Thanks mods, Hey guys I have changed by name to my (other) name. So now all posts by HackITandC/FoneFreak is the same. person. ME ;-)
Offline
HackITandC - RFOM I have is PAL version, iPostNaked, like you wanted:
machine - firmware 1.51 PAL
game used to swap - resistance PAL
game booted - oblivion PAL
Mishkin - have no clue, how you managed to play Oblivion on 1.5, my says that I need upgrade to 1.54!
What version of Oblivion do u have - PAL/US-Jap?
Offline
HackITandC wrote:
Thanks mods, Hey guys I have changed by name to my (other) name. So now all posts by HackITandC/FoneFreak is the same. person. ME ;-)
You are not permitted to have TWO user accounts, pick one, and the other will be deleted.
Offline
thank you all guys for your effort.... hopefully we can all keep this in order so it is easy for us to come and check for any info if we ever need it in the future ![]()
Offline
machine - firmware 1.50 NTSC(J)
game used to swap - resistance NTSC(J)
game booted - F.E.A.R - Requires 1.51 (PAL) & Splinter Cell DA - Requires 1.54(NTSC)
After playing FEAR and the game is saved, it will not load using the swap trick, the game does not detect the save data.
However, Splinter Cell saves and loads fine.
If people are struggling to get the method to work, I had to delete the R:FoM online update and it worked straight away.
Offline
HI supragaz, do u know what name the splinter gamesaves are using?, also what names are the fear games saves using?
Offline
Give me 10 minutes.
Will check now.
Offline
HackITandC wrote:
HI supragaz, do u know what name the splinter gamesaves are using?, also what names are the fear games saves using?
(NTSC)Splinter Cell: BLUS30032_OFFLINE
(PAL)FEAR: BCAS20003
Offline
sorry guys, I'm on 1.51, so that's why Oblivion works. Not 1.5 as I said earlier.

Offline
Gaz, can you see the saves when you turn the ps3 on? ie are they there but then you cant access them when you load the game? or are they not there after you re-boot?
Offline
They are there, they just dont load.
So far:
FEAR doesnt load
Motorstorm doesnt load
Splinter Cell does.
Offline