You are not logged in.
Hey guys,
So my old ps3 ylod and it was not fixable, so i bougt a used system that had a bad lens, and transfered the working lens from my old ps3 to the new one but now my new ps3 will play blu-ray and dvd movies fine, and it reads the ps3 games but when I start them they either freeze or I get an error message (8001002b) , any ideas on what might be wrong? i have done a full format and restore hoping it would help but it didnt. I dont understand why the blu-ray movies play without a problem but the games wont...
any help is greatly appreciated!
Offline
so you swapped only the lens? , wasn't it easier to take your drive, swap the drive's logic boards, and put your drive in the new one?
but anyway you say it play's bluray movies fine, so it looks like the lens is working properly.
my advice is, just wait till powerslave wakes up , he's usually on the forum 24/7 , and so am i ![]()
Offline
Well originally i had swapped the drives and connected the married controller board, but i was having problems with the drive reading anything so I thought there might be something wrong with the motor so i swapped the lens instead.
at any rate I got it fixed, I took the lens out and put it back in and it works perfectly now, must have just been out of place a slight bit or something.
anyway thanks for the reply!
-Matt ![]()
Offline
no problem ... the guy i told you about never woke up, so you where stuck with me ![]()
Offline